2 Humbucker Les Paul Style Wiring Harness – 2 long-shaft push/pull volumes split both HBs independently – Taihan “Blue” PIO Caps

$93.00$159.00

You bring the talent. We’ll supply the kick ass wiring…       

Description

Hoagland Custom located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for over 25 years…

& we love what we do!

This is a 2 humbucker Les Paul style harness. 2 volumes, 2 tones, setup to split both of your humbuckers independent of each other. (The bridge volume splits the bridge. The neck volume splits the neck)

You MUST have 4 or 5 wire humbuckers that are splittable to purchase this wiring harness.

It features 2 long-shaft push/pull volumes controls and 2 CTS long-shaft tone controls. It also features 2 high quality Taihan “Blue” paper-in-oil caps for a superior warm, smooth, creamy tone.

It is “drop in ready”. That is, you only need to connect the pickups, switch, and ground wire… EASY!

The switch is optional and not included with this harness because not everyone needs a switch and we didn’t want you to have to pay for it if you didn’t need it. It is available as an option. Any switch purchased will come with 18″ of leads attached.

HARDWARE:

  • STANDARD – silver dress washers, nuts, output jack
  • OPTIONAL – black or gold dress nuts, washers, & output jack
  • OPTIONAL – “Pure Tone” premium mono output jack

Technical information regarding this Les Paul style harness:

CONTROL POT SPECS

  • Resistance – 500K
  • Taper – audio taper
  • Knob type – 24 spline shaft
  • Shaft diameter – 0.235″ (5.95mm)
  • Thread type – 3/8″-32
  • Threaded shaft length – 19mm / 3/4″
  • Required mounting hole diameter – 3/8″ (9.52mm)

CAPACITOR SPECS

  • Brand – Taihan
  • Model – “Blue”
  • Style – paper-in-oil
  • Value – .022mfd

OUTPUT JACK SPECS

  • Brand – Switchcraft
  • Style – mono
  • Mounting hole diameter – 3/8″ (9.52mm)
  • Thread – 3/8″ x 32
  • Thread length – 1/4″ (6.35m)

SWITCHING FUNCTIONS:   

  • P1 – Bridge pickup only
  • P2 – Neck & bridge pickups together, in-series
  • P3 – Neck pickup only

STANDARD INCLUDES:

  • 2 – 500k CTS tone controls, 500k value, long-shaft (19mm / 3/4″), audio taper
  • 2 – 500k Bourns or Alpha push/pull volume controls, 500k value, long-shaft (19mm / 3/4″), audio taper
  • 2 – Taihan “Blue” paper-in-oil premium capacitors, .022mfd value
  • Switchcraft mono output jack
  • Gavitt vintage style, cloth covered wire
  • easy-to-follow wiring diagram
  • tech support phone & email
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.

Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

 

Additional information

Weight .8 lbs
Dimensions 8 × 6 × 2 in
Hardware

silver dress washers, nuts, & output jack +$0, black dress washers, nuts, & output jack +$10, gold dress washers, nuts, & output jack +$15

Switches

No switch +$0, Panasonic short-shank 3-way toggle switch +$16, Switchcraft short-shaft switch +$35, Switchcraft long-shaft switch +$35, Switchcraft 90° switch +$32

Treble Bleed Mods (2)

No, thanks… +$0, Yes, please! +$10

Output Jack

Switchcraft mono output jack +$0, "Pure Tone" premium mono output jack +$6

UA-176037602-1