2 Humbucker Les Paul Style Wiring Harness – 1 p/p volume, 1 p/p tone – series/parallels each HB


You bring the talent. We’ll supply the kick ass wiring…


Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for almost 30 years…

& we love what we do!

This is a 2 humbucker Les Paul style harness. 1 p/p volume, 1 push/pull tone, setup to series/parallel both humbuckers independent of each other. (The push/pull tone series/parallels the bridge. The push/pull volume series/parallels the neck)

You MUST have 4 or 5 wire humbuckers to use this wiring harness.

It features 2 long-shaft push/pull controls. This does not include the switch however, we offer it as an option with this harness.

It is “drop in ready”. That is, you only need to connect the pickups and ground wire… EASY!

Hardware option details:

  • chrome – chrome dress washers & nuts, silver switch (if you order one), & a silver jack
  • black – black dress washers & nuts, black switch (The Panasonic switch is black. The Switchcraft switches are silver with black dress washers/nuts/switch tip), silver jack w/black dress washers/nuts, & a silver jack w/black dress washers/nuts
  • gold – gold dress washers & nuts, Panasonic gold switch – Switchcraft long-shank is a gold switch – the other Switcraft switches are silver with gold dress washers/nuts, & a gold jack

Technical information regarding this Les Paul style harness:


  • Resistance – 500K
  • Taper – the pots are audio taper
  • Knob type – 24 spline shaft
  • Shaft diameter – 0.235″ (5.95mm)
  • Thread type – 3/8″-32
  • Threaded shaft length – 19mm / 3/4″ (long-shaft)
  • Required mounting hole diameter – 3/8″ (9.52mm)


  • Brand – Sprague/CDE
  • Model – “Orange Drop”
  • Style – poly
  • Value – .022mfd


  • Brand – Switchcraft
  • Style – mono
  • Mounting hole diameter – 3/8″ (9.52mm)
  • Thread – 3/8″ x 32
  • Thread length – 1/4″ (6.35m)

HARDWARE:    (includes dress nuts & washers)

  • chrome (standard)
  • black (available at small additional cost)
  • gold (available at small additional cost)

SWITCHING FUNCTIONS (switch not included):   

  • P1 – Bridge pickup only
  • P2 – Neck & bridge pickups together (in-series with the push/pull pots in the “DOWN” position, in-parallel with the push/pots in the “UP” position)
  • P3 – Neck pickup only


  • 2 – 500k Alpha or Bourns push/pull controls, 500k value, long-shaft (19mm / 3/4″), linear taper
  • 1- Sprague “Orange Drop” capacitor, .022mfd value
  • Switchcraft mono output jack
  • Gavitt vintage style, cloth covered wire
  • easy-to-follow wiring diagram
  • tech support phone & email
  • does NOT include the switch
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.
Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.


Additional information

Weight .7 lbs
Dimensions 8 × 6 × 2 in

chrome (standard), black +$5, gold +$16


No switch +$0, Switchcraft short-shaft switch +$24, Switchcraft long-shaft switch +$26, Switchcraft 90° switch +$24, Panasonic short-shaft switch +$15


Sprague "Orange Drop" poly cap +$0, MojoTone Dijon Coupling poly cap +$3, Mallory "Mustard" cap +$4, Centralab mylar-in-oil cap +$13, "Bumble Bee" (reproduction) paper-in-oil cap +$55