Description
Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for over 25 years… & we love what we do!
This is a 2 humbucker Les Paul style harness. 2 push/pull volumes & 2 tones, setup to series/parallel each humbucker independent of each other. (The bridge push/pull volumes series/parallels the bridge. The neck push/pull volume series/parallels the neck)
You MUST have 4 or 5 wire humbuckers to work with this wiring harness.
It features 2 long-shaft push/pull volumes controls and 2 standard long-shaft tone controls.
It is “drop in ready”. That is, you only need to connect the pickups and ground wire… EASY!
Hardware option details:
- chrome – chrome dress washers & nuts, silver switch (if you order one), & a silver jack
- black – black dress washers & nuts, black switch (The Panasonic switch is black. The Switchcraft switches are silver with black dress washers/nuts/switch tip), silver jack w/black dress washers/nuts, & a silver jack w/black dress washers/nuts
- gold – gold dress washers & nuts, Panasonic gold switch – Switchcraft long-shank is a gold switch – the other Switcraft switches are silver with gold dress washers/nuts, & a gold jack
Technical information regarding this Les Paul style harness:
CONTROL POT SPECS
- Brands – CTS and Bourns Pro Series
- Resistance – 500K
- Taper – the pots are audio taper
- Knob type – 24 spline shaft
- Shaft diameter – 0.235″ (5.95mm)
- Thread type – 3/8″-32
- Threaded shaft length – 19mm / 3/4″ (long-shaft)
- Required mounting hole diameter – 3/8″ (9.52mm)
CAPACITOR SPECS
- Brand – Sprague/CDE
- Model – “Orange Drop”
- Style – poly
- Value – .022mfd
OUTPUT JACK SPECS
- Brand – Switchcraft
- Style – mono
- Mounting hole diameter – 3/8″ (9.52mm)
- Thread – 3/8″ x 32
- Thread length – 1/4″ (6.35m)
HARDWARE: (includes dress nuts & washers)
- chrome (standard)
- black (available at small additional cost)
- gold (available at small additional cost)
SWITCHING FUNCTIONS (switch not included):
- P1 – Bridge pickup only
- P2 – Neck & bridge pickups together, in-series (with the push/pull pots in the “DOWN” position)
- P3 – Neck pickup only
STANDARD INCLUDES:
- 2 – 500k CTS or Bourns Pro Series tone controls, 500k value, long-shaft (19mm / 3/4″), audio taper
- 2 – 500k Alpha or Bourns push/pull volume controls, 500k value, long-shaft (19mm / 3/4″), audio taper
- 2 – Sprague “Orange Drop” capacitors, .022mfd value
- Switchcraft mono output jack
- Gavitt vintage style, cloth covered wire
- easy-to-follow wiring diagram
- tech support phone & email
Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.
