3 Humbucker Les Paul Style Wiring Harness – “Peter Frampton” Style – Mojo “Dijon” Cap


You bring the talent. We’ll supply the kick ass wiring…   



Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for over 25 years…

& we love what we do!

This is a 3 humbucker Les Paul “Peter Frampton” style harness. It features a neck volume, a middle volume, a bridge volume, & a master tone control,  setup exactly like Peter Frampton’s Les Paul.

The middle pickup volume control blends the middle pickup in with the neck, the bridge, or both depending on which switch position you select.

It features long-shaft controls and should work perfectly with your arched top Les Paul.

It is “drop in ready”. That is, you only need to connect the pickups and ground wire… EASY!

Because not everyone needs a new switch, it is an option with this harness.

Hardware option details:

  • chrome – chrome dress washers & nuts, output jack
  • black – black dress washers & nuts, output jack
  • gold – gold dress washers & nuts, output jack

Technical information regarding this Les Paul style harness:


  • Brand – either CTS or Bourns Pro Series
  • Resistance – 500K
  • Taper – the pots are audio taper
  • Knob type – 24 spline shaft
  • Shaft diameter – 0.235″ (5.95mm)
  • Thread type – 3/8″-32
  • Threaded shaft length – 19mm / 3/4″ (long-shaft) OR 9mm / 3/8″ (short-shaft)
  • Required mounting hole diameter – 3/8″ (9.52mm)


  • Brand – Mojo Tone
  • Model – “Dijon”
  • Style – poly
  • Value – .022mfd


  • Brand – Switchcraft
  • Style – mono
  • Mounting hole diameter – 3/8″ (9.52mm)
  • Thread – 3/8″ x 32
  • Thread length – 1/4″ (6.35m)

HARDWARE:    (includes dress nuts & washers)

  • STANDARD – chrome dress nuts, washers
  • OPTIONAL – black or gold (available as an option)
  • OPTIONAL – “Pure Tone” premium mono output jack (available as an option)

SWITCHING FUNCTIONS (switch not included):   

  • P1 – Bridge pickup only (can blend in the middle if desired)
  • P2 – Neck & bridge pickups together (can blend in the middle if desired)
  • P3 – Neck pickup only (can blend in the middle if desired)


  • 4 – 500k CTS or Bourns Pro Series controls, 500k value, long or short-shaft
  • 1 – Mojo “Dijon” Coupling Capacitor, .022mfd value
  • Switchcraft mono output jack
  • vintage style, cloth covered wire
  • easy-to-follow wiring diagram
  • tech support phone & email
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.
Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.


Additional information

Weight .7 lbs
Dimensions 8 × 6 × 2 in

silver nuts, washers, output jack +$0, black nuts, washers, output jack +$15, gold nuts, washers, output jack +$18


No switch +$0, Switchcraft short-shaft switch, silver +$24, Switchcraft short-shank switch – gold +$49, Switchcraft long-shaft switch +$38, Switchcraft 90° switch +$24, Panasonic short-shaft switch +$15

Output Jack

Switchcraft mono output jack +$0, "Pure Tone" mono premium output jack +$6

Treble Bleed Mods

No, thanks… +$0, Yes, please! +$15

Pot Shaft Length

Short-shafts -$5, Long-shafts +$0