Handcrafted Jaguar Wiring Harness – 3 pre-wired sections for channeled Jaguar bodies – Centralab Cap!


You bring the talent. We’ll supply the kick ass wiring…

SKU: HA*-Jag1-CL Category:



Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for over 25 years…

& we love what we do!

Our standard Jaguar wiring solution. Handcrafted here in our shop in Fernandina Beach, Florida. When possible, we use all US-made parts. Assembled with care and crafted by hand. We do not make this harness until you place your order. Each wiring harness is custom built to suit our customer’s needs. It drops right in and is very easy to install. This harness is complete and ready for installation into your Jaguar.

This offering is for the Jaguar wiring harness only. It DOES NOT include the pickguard, roller knobs, or the 3 chrome control plates (shown in the pictures). Since not everyone needs them, we are making them available here as an option.

Due to the way that the majority of Jaguar bodies are routed/channeled, this harness comes in 3 pre-wired parts: the upper switch plate section, the lower switch plate section, & the master controls plate. We show very specifically how to solder these 3 plates together with a minimum of difficulty. Depending on how your particular Jaguar is routed, you may (or may not) need to slightly adjust the depth of the cavity to accommodate the electronics.

Traditionally, the Jaguar had 2 circuits:  lead & rhythm. The lead circuit allows for the activation of both pickups on 3 slide switches on a chrome plate while the rhythm circuit only deals with the neck pickup through the control on the upper control plate. It should be noted that, when in the rhythm setting, the bridge pickup is deactivated.


The Jaguar’s lead circuit is pretty straightforward. There is one master volume knob and one master tone knob, both located on the lower pickguard.


To activate the Jaguar’s rhythm circuit–which is fully separate from the lead–simply move the upper slide switch to the “up” position (away from the neck). The two inside wheels on the upper pickguard next to the slide switch are the circuit’s volume and passive tone controls. The wheel nearest the slider switch will set your volume.

An important note: When in the rhythm setting, only your neck pickup will be operational–your bridge pickup will be deactivated. More than one unaware player has mistaken a Jaguar in rhythm mode for one with a faulty bridge pickup. Also, while in rhythm mode, the pickup selector switch and master volume and tone controls become non-functional.

Includes dress nuts & washers but DOES NOT include the pickguard, roller knobs, control plates (as shown in the pictures).



  • 2 – 1meg audio taper controls
  • 50k linear taper roller rhythm tone control
  • 1meg linear taper roller rhythm volume control
  • 1 – .1mfd value ceramic disk capacitor
  • 1 – .015mfd value Centralab “Grey” mylar-in-oil tone capacitor
  • 1 – .003mfd value ceramic disk capacitor
  • 1 – Switchcraft 2-way slide style switch (rhythm/lead switch)
  • 3 – Switchcraft 2-way slide switches (in the lead circuit)
  • Switchcraft mono output jack
  • Gavitt vintage style, cloth covered wire
  • tech support phone / email
  • easy-to-follow wiring diagram

While all of our wiring solutions are built to be installed rather easily, every guitar is different. We always recommend that you have a professional guitar technician at your local guitar shop install it for you. They are experienced troubleshooters and are equipped to get the best from your setup!

Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

Additional information

Weight .9 lbs
Dimensions 8 × 6 × 2 in
Output Jack

Switchcraft output jack +$0, "Pure Tone" premium output jack +$6

Control Plates (3)

No control plates +$0, Chrome control plates (3) +$40

Roller Knobs

I DO NOT need roller knobs +$0, I DO need roller knobs +$15

Player Orientation

Right-handed +$0, Left-handed +$10


silver nuts, washers +$0, black nuts, washers +$10, gold nuts, washers +$10