Hoagland Custom P-90 Pickups, Handcrafted – Soapbar Style – Vintage Wind

$70.00$150.00

High quality handcrafted P-90 pickups with a soapbar cover…

Clear
SKU: P-90 Pickups - soapbar Categories: ,

Description

Hoagland Custom is a guitar custom shop located in Fernandina Beach, Florida.

Pick ONE (1) custom-wound, handcrafted P-90 pickup (neck or bridge position) OR pick a set of 2 pickups. Can be purchased each (neck or bridge) or as a set by selecting “Set” on the dropdown menu.

Our P-90 pickups measure (soapbar) 85mm x 35mm or (dogear) 87mm x 40mm.

P-90s have a shorter, wider bobbin than Telecasters or Stratocasters which gives them a little higher output and more powerful mids and lows…

Components:

  • neck – wound to 7.8k
  • bridge – wound to 8.8k, RWRP
  • alnico 2 magnets (more sustain and a compressed attack)
  • 50mm polepiece spacing
  • hand scatterwound
  • high quality fiber bobbins… not plastic
  • mounting screws
  • wax-potted to eliminate squealing & microphonics
  • vintage-style, cloth-covered leads
  • handcrafted with all “Made in the USA” parts (bobbins in North Carolina, magnets in Arkansas, pickup wire in Wisconsin, lead wire in New York)

There are a lot of variables that go into creating, or recreating a tone. While each item in your signal chain is important, no one item will do the job. Pickups, along with the way your guitar is wired, are probably the most important parts in your signal chain. Changing out the pickups/wiring has the biggest impact on your sound. If you are looking to replicate a particular tone – blues, rock, jazz – THIS is where you start.

Premium quality pickups that are handwound when you order them. We can custom-tailor this P-90 winding to any spec that you’d like.

This pickup is handcrafted by Hoagland Custom and wound specifically FOR YOU. It is NOT an “off-the-shelf” pickup. It is NOT a relabeled imported pickup. We make this from scratch in our shop and it is the highest quality pickup you can buy made from 100% American made parts.

While all of our pickup & wiring solutions are built to be installed rather easily by most do-it-yourselfers, we always recommend that you have a guitar professional at your local guitar shop install them for you.

Contact Hoagland Custom with any questions regarding these handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

Additional information

Weight .9 lbs
Dimensions 4 × 4 × 4 in
Position

Neck (1), Bridge (1), Neck & Bridge Set (2)

Polepiece Finish

Chrome, Gold, Black

Cover Finish

Black, Cream

UA-122669173-1