Les Paul/SG “Jimmy Page” Style Wiring Harness – Push/Pull Pots – Centralab Mylar-In-Oil Caps – 21 Different Switching Positions!

$121.00$145.00

You bring the talent. We’ll supply the kick ass wiring…   

Description

Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for almost 30 years…

& we love what we do!

Let us start off by saying that you must have 2 humbuckers for this harness and they each must be splittable. That is, they each must have at least 4 conductors(wires).

This wiring mod, popularized by Led Zeppelin & The Yardbird’s great Jimmy Page, gives your Les Paul or SG style guitar a multitude of new tones not available with the stock wiring including the normal 3-way humbucker switching, Strat-like single coil tones, out-of-phase tones, and the huge sounding Broadbucker tone.  All made possible through coil splitting, series/parallel switching and phase-reversal.

Push-pull potentiometers make this switching possible without the need of drilling any new holes in your guitar.  Now your knobs will each have a dual function; adjusting volume or tone when twisted and providing switching options when pushed or pulled.  Installation process takes about 30-45 minutes.

The toggle switch is an option with this harness. Our reasoning is that, if you didn’t need it, we didn’t want to charge you for it.

There’s a great article in Premiere Magazine’s “Mod Garage” :  https://www.premierguitar.com/diy/mod-garage/jimmy-page-wiring

Due to the complexity of this wiring harness, we DO NOT alter it in any way.

This “Jimmy Page” wiring harness features 21 different switching positions!

Technical information regarding this Jimmy Page style harness:

CONTROL POT SPECS

  • Resistance – 500K
  • Taper – pots (4) are audio taper
  • Knob type – 24 spline shaft
  • Shaft diameter – 0.235″ (5.95mm)
  • Thread type – 3/4″-32
  • Threaded shaft length – 3/4″ (long-shaft) or 3/8″ (short-shaft)
  • Required mounting hole diameter – 3/8″ (9.52mm)

CAPACITOR SPECS

  • Brand – Centralab
  • Model – “White” (.022mfd value) & “Royal Blue” (.047mfd value)
  • Style – mylar-in-oil
  • Values – .047mfd & .022mfd

OUTPUT JACK SPECS

  • Brand – Switchcraft
  • Style – mono
  • Mounting hole diameter – 3/8″ (9.52mm)
  • Thread – 3/8″ x 32
  • Thread length – 1/4″ (6.35m)

HARDWARE:    (includes dress nuts & washers)

  • chrome (standard)
  • black (optional)
  • gold (optional)

VOLUME & TONE FUNCTIONS:   

  • Bridge volume knob – splits the bridge pickup
  • Neck volume knob – splits the neck pickup
  • Bridge tone knob – puts the bridge & neck pickups out-of-phase with each other
  • Neck tone knob – puts the bridge & neck pickups in-series

STANDARD INCLUDES:

  • 4 – 500k push/pull controls, audio taper
  • 2 Centralab mylar-in-oil tone capacitors, .022mfd & .047mfd values
  • Switchcraft mono output jack
  • easy-to-follow wiring diagram
  • tech support phone & email
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.
Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

Additional information

Weight .9 lbs
Dimensions 4 × 4 × 4 in
Hardware

chrome (standard), black +$10, gold +$10

Output Jack

Switchcraft mono output jack +$0, "Pure Tone" premium mono output jack +$6

Pot Shaft Length

Short-shaft push/pull pots +$0, Long-shaft push/pull pots +$8

UA-176037602-1