2 Humbucker Les Paul Style Wiring Harness – 2 push/pull tones split both HBs independently

$65.00$111.00

You bring the talent. We’ll supply the kick ass wiring…

Description

Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup making for over 25 years…

& we love what we do!

This is a 2 humbucker Les Paul style harness. 2 volumes and 2 push/pull tones, setup to split both of your humbuckers independent of each other. (The bridge tone splits the bridge. The neck tone splits the neck)

You MUST have 4 or 5 wire humbuckers that are splittable to use this wiring harness.

It features 2 long-shaft push/pull tone controls and 2 standard long-shaft volume controls.

It is “drop in ready”. That is, you only need to connect the pickups and ground wire… EASY!

Hardware option details:

  • chrome – chrome dress washers & nuts, silver switch (if you order one), & a silver colored output jack
  • black – black dress washers & nuts, black switch (The Panasonic switch is black. The Switchcraft switches are silver with black dress washers/nuts/switch tip), silver jack w/black dress washers/nuts
  • gold – gold dress washers & nuts, Panasonic gold switch – Switchcraft long-shank is a gold switch – the other Switchcraft switches are silver with gold dress washers/nuts, & a gold jack

Technical information regarding this Les Paul style harness:

CONTROL POT SPECS

  • Resistance – 500K
  • Taper – the pots are audio taper
  • Knob type – 24 spline shaft
  • Shaft diameter – 0.235″ (5.95mm)
  • Thread type – 3/8″-32
  • Threaded shaft length – 19mm / 3/4″ (long-shaft)
  • Required mounting hole diameter – 3/8″ (9.52mm)

CAPACITOR SPECS

  • Brand – Sprague/CDE
  • Model – “Orange Drop”
  • Style – poly
  • Value – .022mfd

OUTPUT JACK SPECS

  • Brand – Switchcraft
  • Style – mono
  • Mounting hole diameter – 3/8″ (9.52mm)
  • Thread – 3/8″ x 32
  • Thread length – 1/4″ (6.35m)

HARDWARE:    (includes dress nuts & washers)

  • chrome (standard)
  • black (available at small additional cost)
  • gold (available at small additional cost)

SWITCHING FUNCTIONS:   

  • P1 – Bridge pickup only
  • P2 – Neck & bridge pickups together, in-series
  • P3 – Neck pickup only

STANDARD INCLUDES:

  • 2 – 500k CTS volume controls, 500k value, long-shaft (19mm / 3/4″), audio taper
  • 2 – 500k Bourns push/pull tone controls, 500k value, long-shaft (19mm / 3/4″), linear taper
  • 2 – Sprague “Orange Drop” capacitors, .022mfd value
  • Switchcraft mono output jack
  • Gavitt vintage style, cloth covered wire
  • easy-to-follow wiring diagram
  • tech support phone & email
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.

Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

 

Additional information

Weight .8 lbs
Dimensions 8 × 6 × 2 in
Hardware

chrome (standard), black +$5, gold +$16

Switches

No switch +$0, Switchcraft short-shaft switch +$24, Switchcraft long-shaft switch +$24, Switchcraft 90° switch +$24, Panasonic short-shaft switch +$15

Output Jacks

Switchcraft output jack +$0, "Pure Tone" Premium output jack +$6

UA-176037602-1