Description
Hoagland Custom, located in sunny Fernandina Beach, Florida, has specialized in custom guitar wiring and pickup building for over 25 years…
& we love what we do!
This is a 2 humbucker, short-shaft, Strat style wiring harness. It features a 5-way lever style switch that splits both of the humbuckers.
You MUST have 4 or 5 wire humbuckers that are splittable for this wiring harness to function correctly.
It features 2 short-shaft volume & tone controls and a 5-way lever style switch. (Think Tele style wiring)
It is “drop in ready”. That is, you only need to connect the pickups and ground wire… EASY!
HARDWARE:
- STANDARD – chrome dress washers, nuts, switch mounting screws, & output jack
- OPTIONAL – black or gold dress washers, nuts, switch mounting screws
- OPTIONAL – “Pure Tone” premium mono output jack
CAPACITOR:
- Sprague “Orange Drop” poly capacitor, .022mfd value
Technical information regarding this 2 humbucker style harness:
CONTROL POT SPECS
- Resistance – 500K
- Taper – the volume control is audio taper, the tone control is linear taper
- Knob type – 24 spline shaft
- Shaft diameter – 0.235″ (5.95mm)
- Thread type – 3/8″-32
- Threaded shaft length – 9mm / 3/8″ (short-shaft)
- Required mounting hole diameter – 3/8″ (9.52mm)
CAPACITOR SPECS
- Brand – Sprague/CDE
- Model – “Orange Drop”
- Style – poly
- Value – .022mfd
OUTPUT JACK SPECS
- Brand – Switchcraft
- Style – mono
- Mounting hole diameter – 3/8″ (9.52mm)
- Thread – 3/8″ x 32
- Thread length – 1/4″ (6.35m)
SWITCH SPECS
- lever style, 5-way
SWITCHING FUNCTIONS:
- P1 – Bridge, full humbucker
- P2 – Neck & bridge, full humbuckers
- P3 – Neck, full humbucker
- P4 – Bridge, full humbucker with neck split to single coil
- P5 – Bridge split to single coil
STANDARD INCLUDES:
- 1 – CTS or Bourns Pro Series volume control, 500k value, short-shaft (9mm / 3/8″), audio taper
- 1 – CTS or Bourns Pro Series tone control, 500k value, short-shaft (9mm / 3/8″), linear taper
- 1 – Sprague “Orange Drop” capacitor, .022mfd value
- 1 – lever style 5-way switch
- Switchcraft mono output jack
- Gavitt vintage style, cloth covered wire
- easy-to-follow wiring diagram
- tech support phone & email
While all of our wiring solutions are built to be installed rather easily, we always recommend that you have a guitar professional at your local guitar shop install it for you. There are issues that sometimes come up during installation (grounding, etc.) and your local guitar tech is equipped to diagnose & handle those for you.
Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.
You must be logged in to post a comment.