“SUPER6” Tele Wiring Harness w/3-Way Switching – for 2 Humbuckers


You bring the talent. We’ll supply the kick ass wiring…   



Hoagland Custom has specialized in custom guitar wiring and pickup making for over 25 years and we love what we do!

This Tele “SUPER” mod is a great wiring harness for a 2 humbucker Tele!  It’s pickup-splitting Heaven! It also includes a treble bleed modification to help release some of those delicious humbucker highs at lower pot volumes.

This harness splits both humbuckers individually using a push/pull volume & a push/pull tone control.

A Push/Push volume and tone control pot is available for right-handed harnesses only.

You MUST have 2 splittable humbuckers (either 4 or 5 wires) to use this harness.

HARDWARE:  (incl. dress nuts & washers and switch mounting screws)

  • chrome (available at slight additional cost)
  • nickel (available at slight additional cost)
  • black (available at slight additional cost)
  • gold (available at slight additional cost)


  • Sprague “Orange Drop” poly capacitor, as standard & no additional cost
  • MojoTone Dijon Premium Foil/Film capacitor, $3 upgrade (From the manufacturer: “Mojotone Dijon capacitors are high quality foil/film capacitors made to our exact specification. We like to call them musical capacitors because of their good tone and transparency.”)
  • Mallory “Mustard” capacitor, $4 upgrade
  • Vitamin T “Silver Barrel” paper-in-oil capacitor, $12 upgrade


  • P1 – bridge humbucker, full on (push/pull in the “DOWN” position)
  • P2 – neck & bridge humbuckers, full on (push/pull in the “DOWN” position)
  • P3 – neck humbucker, full on (push/pull in the “DOWN” position)
  • P1 – bridge humbucker, split to single coil only (push/pull in the “UP” position)
  • P2 – neck & bridge humbuckers, split to single coils only (push/pull in the “UP” position)
  • P3 – neck humbucker, split to single coil only (push/pull in the “UP” position)


  • 2 Alpha or Bourns push/pull volume & tone controls, 500k value, linear taper (push/push pots are also available as an option)
  • treble bleed mod to allow the highs to pass to your signal at lower volumes
  • Sprague “Orange Drop” poly capacitor, .022mfd value
  • 3-way lever style switch
  • Switchcraft mono output jack
  • vintage style, cloth covered wire
  • tech support phone & email

While all of our wiring solutions are built to be installed rather easily, some are more complex than others and we always recommend that you have a guitar professional at your local guitar shop install it for you.

Contact Hoagland Custom with any questions regarding this wiring solution, our custom, handcrafted Hoagland Custom pickups, or any other guitar wiring solution that you might need.

Additional information

Weight .5 lbs
Dimensions 8 × 6 × 2 in

None +$0, Chrome +$18, Nickel +$18, Black +$24, Gold +$28


Sprague "OD" poly cap, standard), Mojo Dijon poly cap +$3, Mallory "Mustard" cap +$4, Vitamin T "Silver Barrel" paper-in-oil cap +$12

Pot Style

Push/Pull +$0, Push/Push +$15